Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced
6-32 tapped holes and is precision machined from 6061 T6 aluminum. The set-screw is 10-32 and uses a 3/32” hex key. These set screw hubs work with our new ServoBlock Kits.
These hubs use a 3/32” Hex Key
(click here)
6-32 Pan Head Screws
(click here)
6-32 Socket Head Screws
(click here)
6-32 Truss Head Screws
(click here)
6-32 Flat Head Screws
(click here)
0.770” Set Screw Hub Hardware
0.770” Set Screw Hubs (3mm - 6mm)
0.770” Set Screw Hubs (1/8” - 1/2”)
These hubs utilize a .770” hub pattern.
Use a set screw hub in conjunction with a .770” to .625” hub adaptor to mount foam wheels to channel.
DREAM. DESIGN. BUILD. REPEAT.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 9
Fig. 10
Copyright 1999-2013 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Proud Distributor of
