“The ultimate in 2.4GHz control”

Brand New with Full Factory Warranty - USA Authorized Dealer

(1) Transmitter
(1) Frequency Flag
(1) 700mah Tx Battery
(1) Tx/Rx Charger
(1) Neck Strap
(1) Manual

All systems start with the following:

Note: 10CAG 2.4GHz transmitters will only work with 2.4GHz receivers.

ServoCity offers you the ability to build your own custom radio package. Simply choose the items you need and then click on the “Click for Price” button. This will give you a real-time quote on the system of your choice.

Why is Futaba’s 2.4GHz system better?
Channel Shifting - This means that interference is virtually impossible. Futaba’s system only occupies each individual frequency for 2 milliseconds.
Stronger, More Robust Link - Futaba’s system doesn’t need redundant receivers. Instead, it uses a combination of Channel Shifting and Dual Antenna Diversity (DAD) to provide a robust, highly dependable link between the transmitter and receiver.
Pre-Vision Packet Screening Technology - This looks ahead for potential problems when scanning incoming data and applies sophisticated error correction techniques resulting in a system that gives the user a solid, impenetrable connection with their model.
Custom Developed Technology - Futaba uses custom IC chips that have been designed specifically for radio control.

So how does the receiver know what transmitter to link to?
Each transmitter has a unique ID code that after linking with the 2.4GHz receiver, assures this receiver will only follow commands from this transmitter. Set it and forget it! Just push the recessed button on the receiver and it will never forget the unique transmitter ID code, which locks the receiver to the transmitter. With over 134 million possible codes, there’s no chance for a conflict.

They are here....and it is everything our customers have wanted in a full-range 2.4GHz system! Futaba has been using Spread Spectrum technology for nearly 15 years in industrial R/C applications, so they have the dedicated engineering staff with 2.4GHz expertise. Unlike other manufacturers who started offering 2.4GHz for hobby R/C models using off-the-shelf IC chips, Futaba invested in extra research and development resulting in a custom IC chip thats ideally suited for the unque demands of R/C flying.

Systems start at only $399.99!

Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies. Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antennas built into the receiver ensuring that the aircraft stays under constant control of transmitter regardless of altitude.
- 7 point throttle and pitch curves
- 12 factory defined glider mixes Logic switches allows timer activation or other function just by changing
 positions of specific sticks or switches
- 15-model memory, expandable to 48 models with optional 128K CAMPac module
- 10-character model and user naming Assignable switches and dials/functions 2 proportional slider switches
- Model select, copy, reset Fail-safe, sub trims.
- Servo reversing and EPA 160 x 72 backlit LCD with adjustable contrast Servo monitor display
- Auxilliary channel screen for 1-step function/switch assignment
- One year limited warranty

Switch Layout here

Copyright 1999-2012 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.