130 RPM Micro GearmotorBlocks

· Operating Range: 6VDC
· Torque @ Stall: 27 oz-in.@ 6VDC
· Torque @ Stall: 50 oz-in.@ 12VDC
Gear train damage can occur if stalled (locked)
· 0.118” (3mm) Diameter “D” Shaft
· No load current: 40mA (6VDC)
· No load current: 70mA (12VDC)
· Stall current: 360mA (6VDC)
· Stall current: 1600mA (12VDC)
· No load speed: 65 RPM @ 6VDC
· No load speed: 130 RPM @ 12VDC
· Gear ratio: 210:1
· Motor size: 1.14” x 1.00” x 0.50”
· Shaft size: 0.118" (3mm) Dia. x 0.393” (10mm) L
· Weight: 0.6 oz (17g))
· DC reversible motors
- Pre-tinned wire leads (6”)

* Stalling this gearmotor could cause gear damage.

Stall Torque is the torque which is produced by a motor when the output rotational speed is zero, it may also mean the torque load that causes the output rotational speed of a motor to become zero - ie to cause stalling.
Electric motors continue to provide torque when stalled. However, electric motors left in a stalled condition are prone to overheating and possible damage since the current flowing is maximum under these conditions.

If you are simply needing to operate your gearmotor from a switch, click on the picture of the switch at the right.

Introducing our new line of micro gearmotors! Although these micro gearmotors have a footprint comparable to a micro-size servo and tip the scales at only 0.6oz, they are incredibly powerful. All-metal gears ensure the motor will hold up in even the harshest applications. The extremely versatile gearmotor case provides protection for the gears and offers numerous mounting options to fit a variety of custom applications. These micro gearmotors have a 3mm D-shaft that protrudes from the gearbox case.