We have the parts for your ideas!
 ServoCity - Electronics & Accessories - Video Cameras - 2.4GHz Color Video System 
2.4GHz Color Video System

Introducing our new 2.4 GHz Day/Night Wireless Camera System.  This system transmits color video and audio for over 400 feet (line of site).  The camera is very compact even with the transmitter and lithium battery installed internally.  The camera can transmit up to 4 channels so that you can operate 4 units at the same time.  Simply charge the camera, plug the receiver into a TV or monitor and your ready to go. The internal battery will run the camera for over 5 hours of continuous use.  With 8 super-bright IR LED’s, you can see in the darkest conditions perfectly (0 Lux).  Comes with everything you need including chargers, power supply and all cables.  Camera and receiver sold separately so you can have multiple cameras and one receiver.

Camera Package includes:
(1) 2.4 GHz Wireless Camera
(1) UL Approved AC Adaptor
(1) User Manual
(1) Camera Bracket
(1) Camera Charger
(1) Transmitter and Lithium battery is
     inside camera housing

Price:

 $89.99

Part:

 CW3510TX

Status:

 

Qty:

Receiver Package includes:
(1) 2.4 GHz Wireless Receiver
(1) UL Approved AC Adaptor
(1) A/V (audio/video) cable
(1) User Manual
(1) Receiver Bracket

Price:

 $59.99

Part:

 CW3510RX

Status:

 

Qty:

The transmitter, lithium battery and microphone are mounted inside the aluminum camera case. Simply mount the camera anywhere, no battery or video cables needed.  8 super-bright IR LED’s ensure great vision in even the darkest conditions.  Quarter shown for size reference.

The 1/4”-20 threaded mount can be attached to the bottom or the top of the camera. This makes it easy when mounting on a chassis of a robot or the belly of an aircraft.  Bolts directly to any of our pan and tilt mounts.

Wireless Camera Specifications

Output Level: 90db microvolts / meter @ 3 meter
Transmitting Frequency: 4CH 2,400 to 2,483 MHz
Modulation: FM
Antenna: 50 ohm SMA
Receiving Sensitivity: -85dbm
Video Input Level: 1.0 VP-P @ 75 ohm
Audio Input Level: 1.0 VP-P @ 600 ohm
Image Sensor: 1/3” C-MOS sensor
Number of Pixels: 380 TV lines
Scanning System: 525 lines, 60 fields
Sync System: Internal Sync
Minimum Illumination: 1.5 Lux/F1.5 & IR LED on: 0 Lux
SN Ratio: More than 45db
Gamma Characteristics: 0.45
Electronic Shutter Speed: 1/60 to 1,500 sec.
Lens: 78 degree wide angle lens
Microphone: Condenser
Lithium Batter: 500mah
Charging Time: 2 hours
Working Time: 5 hours
Operating Temperature: 14 degree F  to 122 degree F
Dimensions: 87x43x90 mm
Weight: 235g (5.8 oz.)

Wireless Receiver Specifications

Receiving Frequency: 4CH 2,400 to 2,483 MHz
Demodulation: FM
Antenna: 50 ohm SMA
Receiving Sensitivity: -85dbm
Video Output: 1 VP-P @ 75 ohm
Audio Output: 1 VP-P @ 600 ohm
Power Supply: DC 8V
Current Consumption: 180ma
Dimensions: 115x20.5x99 mm
Weight: 248

The receiver is very easy to hookup and switching channels is simply pushing a button.

The system comes with the mount shown above.

This camera works extremely well with our SPT100 Pan and Tilt Kit and can be mounted upright or upside down.

Copyright 1999-2007 Robotzone. LLC.  - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.