Other 2.4GHz systems hold firm to one or two frequencies, increasing the potential for interference. The frequency of Futaba 2.4GHz FASST shifts every 2 milliseconds, so there are no signal conflicts or interruptions — and no need for a frequency pin!

2.4GHz FASST scans incoming data and applies sophisticated error correction techniques — resulting in a system that gives you a solid, impenetrable connection with your model.

Futaba 2.4GHz FASST systems seamlessly select the best reception between two receiver antennas, so there’s no loss of signal.

Futaba 2.4GHz FASST system transmitters leave the factory with a unique and permanent ID code. Once linked to the receiver, the code ensures that the receiver will recognize and respond ONLY to that transmitter. The linking process is simple...just push a button on the receiver.

Futaba uses custom IC chips that have been designed specifically for radio-control — ensuring quality, reliability, and safety. This is why Futaba FASST systems are faster and more reliable than the competition.

Futaba’s small, powerful 2.4GHz FASST receivers for flight systems can control giant-scale models as easily as park flyers. Full-range systems from other manufacturers include a bigger, two-piece receiver, and you must purchase a smaller park flyer receiver separately.

Latency is the elapsed time between your movement of the transmitter controls and servo response. In Futaba 2.4GHz FASST systems, that response can happen over twice as fast — so you feel less like you’re “out in front” leading your model, and more like you’re inside driving or flying it.

Over twice as many bits of information per packet than the leading competitor, for incredible response speed.

Twice as many bits of information per packet and 32,768 steps of servo resolution to get more solid control, fast response and smoothness of the servo travel.

Copyright 1999-2008 Robotzone. LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.