SD Linear Actuator Side View
Super Duty Actuator with Bracket 2

Operating Voltage: 6.0-12 Volts DC
Operating Temperature Range: -25 to +60 Degree C
-13 to +149 Degrees F
Operating Speed (12V): 2.90” second at No load
Operating Speed (12V): 1.89” second at Max load
Dynamic Thrust (12V): 450 lbs. Thrust
Static Load: 2000 lbs.
Current Drain (12V): 2ah operating No load
Motor Type: 3 Pole Ferrite
Potentiometer: I0K
Gear Type: 4 Metal Gears
Connector Wire Length: 12"
Recommended Fuse: 20amp inline
IP Grade: 2IP 63-total dust protection, water resistant
Duty cycle: 25% (25% on, 75% off)
Static load capacity: 1011 pounds

Detailed Specifications

Using our mounting brackets will allow you to easily and quickly attach the actuator to various contact points as shown above.

To get your actuator up and running, apply 6-12VDC to the positive (red) and negative (black) wires. You do not need to do anything with the potentiometer wires (Blue, Yellow, White). The potentiometer wires are only needed if you are building a system which requires you to know the exact position of the actuator piston. For normal operation, we recommend purchasing the switch above and wiring the switch according to the schematic.

Feedback Wiring Schematic:
White - 10K Potentiometer Reference
Blue - 10K Potentiometer Wiper (Position Signal) Yellow - 10K Potentiometer Reference

Actuator Wiring for switch 2

Price:

 $9.99

Part:

 275-709

Status:

 

Qty:

DPDT 20A Actuator Switch

12V Servo Actuator in test

8”

SDA8-290

172.6 oz.

$399.99

12”

SDA12-290

186.7 oz.

$399.99

Out of Stock Button

 

18”

SDA18-290

200.4 oz.

$399.99

Out of Stock Button

 

4”

SDA4-290

142.3 oz.

$399.99

6”

SDA6-290

158.9 oz.

$399.99

 

Stroke

Part #

Weight

Price

Status

Qty

Buy

24”

SDA24-290

221.8 oz.

$399.99

Move up to 450 lbs for under $400! Introducing our all new Super-Duty 12V Linear Actuators. Now you have the power for those extra large projects. These actuators utilize precision ball screw drives which offer increased efficiency, life and precision over ACME drives. Built in potentiometer can be easily accessed for position feedback but is not necessary for operation. Limit switches at both ends prevent over-run. All aluminum construction with metal drive gears ensure tremendous durability and reliability. We offer them in six stroke lengths from 4 inches up to 24 inches. Extension shaft is 1.125” diameter. Mounting holes are 1/2” diameter and bolt up directly to our optional mounting brackets. Note: These systems are extremely powerful and caution must be used during operation.

X = Center to Center

Stroke

Retracted

Extended

4”

15.71”

19.73”

6”

17.72”

23.74”

8”

19.72”

27.71”

12”

26.77”

38.78”

18”

32.77”

50.76”

24”

38.78”

62.80”
Actuator Potentiometer Schematic2

 

450+ lbs.

 

2.90 inches per sec.
Super Duty Actuator Schematics 2
Super Duty Actuator Mounting Bracket

Super-Duty Mounting Bracket

Price:

 $24.99

Part:

 HDM500

Status:

 

Qty:

Super Duty Actuator with Bracket
SD Linear Actuator
SD Linear Actuator Front Side
SD Linear Actuator with Can
Actuator Potentiometer Wire Schematic

-Sealed O-ring
-Durable design for even the          toughest industrial applications
-Clutch overload protection
-Metal gears
-CE Certified (CD55011)

Powder coated aluminum base
Stainless steel extension rod
Steel protection tube

Copyright 1999-2012 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.

We have the parts for your ideas!
450 lbs. Thrust Linear Actuator
Shopping Cart Button