SD Linear Actuator Side View

Operating Voltage: 6.0-12 Volts DC
Operating Temperature Range: -25 to + 65 Degree C
-13 to + 149 Degrees F
Operating Speed (12V): 2.63” second at No load
Operating Speed (12V): 1.85” second at Max load
Dynamic Thrust (12V): 560 lbs. Thrust
Static Load: 3,050 lbs.
Current Drain (12V): 3A operating No load
Motor Type: 3 Pole Ferrite
Potentiometer: I0K
Gear Ratio: 5:1 Ratio
Gear Type: 4 Metal Gears
Connector Wire Length: 12"
Recommended Fuse: 20 amp inline
IP Grade: IP 65-total dust protection, water resistant
Duty cycle: 25% (25% on, 75% off)

Detailed Specifications

To get your actuator up and running, apply 6-12VDC to the positive (red) and negative (black) wires. You do not need to do anything with the potentiometer wires (Blue, Yellow, White). The potentiometer wires are only needed if you are building a system which requires you to know the exact position of the actuator piston. For normal operation, we recommend purchasing the switch above and wiring the switch according to the schematic.

Feedback Wiring Schematic:
White - 10K Potentiometer Reference
Blue - 10K Potentiometer Wiper (Position Signal) Yellow - 10K Potentiometer Reference

Actuator Wiring for switch 2

8”

SDA8-263

172.6 oz.

$399.99

Out of Stock Button

 

12”

SDA12-263

186.7 oz.

$399.99

Out of Stock Button

 

18”

SDA18-263

200.4 oz.

$399.99

4”

SDA4-263

142.3 oz.

$399.99

6”

SDA6-263

158.9 oz.

$399.99

Stroke

Part #

Weight

Price

Status

Qty

Buy

24”

SDA24-263

221.8 oz.

$399.99

Move up to 550 lbs for under $400! Introducing our all new Super-Duty 12V Linear Actuators. Now you have the power for those extra large projects. These actuators utilize precision ball screw drives which offer increased efficiency, life and precision over ACME drives. Built in potentiometer can be easily accessed for position feedback but is not necessary for operation. Limit switches at both ends prevent over-run. All aluminum construction with metal drive gears ensure tremendous durability and reliability. We offer them in six stroke lengths from 4 inches up to 24 inches. Extension shaft is 1.125” diameter. Mounting holes are 1/2” diameter and bolt up directly to our optional mounting brackets. Note: These systems are extremely powerful and caution must be used during operation.

X = Center to Center

Stroke

Retracted

Extended

4”

15.71”

19.73”

6”

17.72”

23.74”

8”

19.72”

27.71”

12”

26.77”

38.78”

18”

32.77”

50.76”

24”

38.78”

62.80”
Actuator Potentiometer Schematic2

 

 560 lbs.

 

 2.63 inches per sec.
Super Duty Actuator Schematics 2
SD Linear Actuator
SD Linear Actuator Front Side
SD Linear Actuator with Can
Actuator Potentiometer Wire Schematic

Powder coated aluminum base
Stainless steel extension rod
Steel protection tube

Features:
-Sealed O-ring
-Durable design for even the          toughest industrial applications
-Clutch overload protection
-Metal gears
-CE Certified (CD55011)

5-1 gear ratio (SDA) table
DMSC6-16-10 small

BRAND NEW!

The Digital Manual Speed Controller provides proportional forward and reverse control of your linear actuator. Simply supply 6-16V to the controller and plug in your linear actuator. The speed and direction are controlled by the knob.

Price:

 $9.99

Part:

 275-709

Status:

 

Qty:

DPDT 20A Actuator Switch

Copyright 1999-2013 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.

We have the parts for your ideas!
560 lbs. Thrust Linear Actuator
Shopping Cart Button
Customer Login
Register
ServoCity on YouTube
ServoCity on Facebook!
ServoCity on Twitter!
ServoCity Blowout Deals Newsletter Sign-Up!
ServoCity on Google+

Newsletter Sign-up

New Products! - Click Here

Proud Distributor of

Proud Actobotics Distributor