Our DDP125 Pan system is perfect for the rotation of cameras or sensors in R/C or UAV aircraft. One of the biggest problems with servos is they can not always handle a heavy side load even though they have the power to rotate your attachment. As you can see from the pictures and schematic, this system mounts via the ABS plates 6 mounting holes. By incorporating an external ball bearing in the ABS case plate ensures that whatever the servo is set to rotate will be extremely rigid side to side. Once mounted, simply use the 1/4” bore clamping hub to assist in attaching your camera or sensor to the ball bearing supported shaft. Patented
The pan servo is mounted to the ball bearing plate and spaced off with (4) threaded posts. The 1/4” shaft is supported by a ball bearing.
(Servo not included)
The ball bearing pan plate has six holes for easy mounting to various surfaces or posts.
The clamping hub has 4 equally spaced 6-32 tapped holes for easy mounting of attachments.
The shaft is broached for the spline of the servo and comes with two screws, one for metal gear and one for nylon/karbonite gear servos.
(Servo not included)
Click here to watch a video of our DDP125 Pan System in action!
Attach this DDP125 Pan with the DDT500 Tilt and you will have a super smooth Pan & Tilt system.
This product utilizes a
0.770” hub pattern.
DDP-BM Base Mount Kit
(sold separately)
Shown attached to a DDT500 tilt with an optional base mount kit.
Copyright 1999-2013 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Proud Distributor of
