Click Here to view
instruction manual

CIU-2 Features:
- Setting Data Reads - reads the program setting data of the connected ESC
- Setting Data Write - writes data to the ESC
- Default Data Write - writes standard data from the factory
- Get Data - reads the program data when connected to ESC
- Clear Data - clears data from the ESC

Specifications:
- Interface: USB Rev1.1 compliant
- USB Connector: USB series A connector
- Operating Voltage: 5V +/- 0.2V (USB bus power)
- Current Drain: At connection idle; 12.3 +/- 2mA
- Operating Environment: Temperature -10 to 50 degrees C
- Dimensions: 0.72” x 2.22” x 0.35” (18.2mm x 56.5mm x 9mm)
- Weight: 0.26 oz (7.5g)

NOTE: Requires PC with Windows® Vista 32bit, XP 32bit, Windows® 7 32bit, or Windows 2000 system and USB port

500mm extension included to connect to your ESC

Note: The CIU-2 is only for use with Futaba Serial Bus Series Servos (S3171SB, S9070SB, S9071SB, S9072SB)

Copyright 1999-2011 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.