|
|
1,480 oz-in. |
|
6.70 sec/360° (8.6:1 ratio) |
|
GDP985A-BM |
Rotation |
Weight |
4.8V Power |
6.0V Power |
4.8V Speed |
6.0V Speed |
|
HS-985MG (8.6:1 ratio) |
450° |
9.4 oz. |
1,144 |
1,480 |
8.25 sec. |
6.70 sec. |
Introducing the all new aluminum GDP985A-BM Pan System. This unit is able to rotate over 50 pounds (8.6:1 ratio) up to 450°. Precise feedback is provided by the military grade precision potentiometer. The final output shaft is a 3/8” stainless steel shaft supported by dual ABEC-5 ball bearings. 48 pitch gears are used for precise control and the case is machined from high-grade 6061 T6 aluminum. The GDP985A-BM is designed so the power from the servo is transferred directly to the final gear and then to your choice of attachment, no power is transferred through the shaft and therefore no slippage occurs. Gear ratios can be easily changed to vary the power and speed. Comes fully assembled ready to plug into your controller. (Patented)
Tilt System
Joystick
Extensions
Power Supply
Accessories
Package Deal
48 Pitch Metal Gears
Eight holes on the bottom for an easy flat surface mount.
The GDP985A-BM can handle side loads up to 200 pounds near the output shaft.
Pushing or pulling loads up to 150 pounds can easily be handled.
A multi-turn precision potentiometer is used for precise feedback.
This pan utilizes a
0.625” hub pattern.
Click here for more information.
Copyright 1999-2012 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
