The GY611 Gyro is an AVCS (Angular Vector Control System) rate gyro. The GY611 features a super narrow pulse (760us) drive system that substantially improves servo response. A S9256 digital servo is used (0.06 sec/60 degrees). Microcomputer high-speed arithmetic processing improves the gyro response. The high resolution 12-bit A/D accurately converts the sensor output to a digital signal. Additionally, the GY611 Gyro has the newest SMM (Silicon Micro Machine) and low-back aeroform case to improve vibration resistance. The GY611 comes with a detailed instruction manual.
Includes:
- 1) GY611 Control Amp
- 1) GY611 Sensor
- 3) Sensor tape
- 1) Mini Screwdriver
- 1) S9256 Servo
- 1) 3pc Hornpack w/ hardware
- 1) Instruction Manual
Requires:
- 4.8V Rx battery only (higher voltage could damage the servo)
- Assembly
S9256 Servo Ratings:
- Dimensions: 1.6” x 0.79” x 1.4” (40 x 20 x 36.6mm)
- Weight: 2.01oz (57g)
- Speed: 0.06 sec/60 degrees @ 4.8V
- Torque: 47 oz-in (3.4 kg-cm) @ 4.8V
Specifications:
- Yaw-axis stabilizer for helicopter (rate gyro)
- Display Device: 8 character dot matrix LCD
- Operating Voltage Range: DC 3.8V - 5V
- Current Drain: 70mA @ 5V, including sensor
- Dimensions: Amp 2.2” x 1.2” x 0.59” (57 x 32 x 18mm)
Sensor 1.2” x 1.2” x 0.71” (30 x 30 x 18mm)
- Weight: Amp 1.19oz (34g) Sensor 1.05oz (30g)
GY611 Gyro Control Sensor
GY611 Gyro Control Amp
Copyright 1999-2013 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Proud Distributor of
