Linear Servo Diagram (10-14V)
12V Servo Actuator back with mount
Linear Servo Group

Introducing our all new Heavy Duty Linear Servo. Designed to run on a 12V battery or power supply (8 amp minimum) and plug directly into your receiver or any other type of servo controller. Advanced digital control gives you precise, accurate movements. The digital controller will also supply your receiver or any other type of servo controller with 5V at 1.5 amps so you do not need a separate battery. All aluminum construction ensures tremendous durability and reliability. Offered in stroke lengths from just under 2.00 inches up to slightly under 12.00 inches. Extension shaft is .785” diameter. Mounting points are 1/4” diameter and bolt up directly to our optional mounting brackets. 

5.90”

HDLS-6-50-12V

43.3 oz.

$299.99

In-Stock

7.87”

HDLS-8-50-12V

45.1 oz.

$299.99

In-Stock

9.94”

HDLS-10-50-12V

47.9 oz.

$299.99

In-Stock

11.81”

HDLS-12-50-12V

50.4 oz.

$299.99

In-Stock

1.96”

HDLS-2-50-12V

38.2 oz.

$299.99

In-Stock

3.93”

HDLS-4-50-12V

40.2 oz.

$299.99

In-Stock

Stroke

Part #

Weight

Price

Status

Qty

Buy

Digital
12V Servo Actuator Extend Retract 2
12V Servo Actuator Shaft End
12V Servo Actuator 2
HDSA Schematic

.785” Diameter Extension Rod with .250” mounting hole

 

 115+ lbs.

 

 .50 inches per sec.

X = Center to Center

Stroke

Retracted

Extended

1.96”

7.68”

9.64”

3.93”

9.69”

13.62”

5.90”

11.69”

17.59”

7.87”

13.70”

21.57”

9.94”

15.71”

25.65”

11.81”

17.72”

29.53”

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage:
10-14 Volts DC
Operating Temperature Range: -20 to +60 Degree C
-13 to +149 Degrees F
Operating Speed (12V): .59” second at No load
Operating Speed (12V):
.39” second at Max load
Dynamic Thrust (12V):
115 lbs. Thrust
Static Load:
500 lbs.
Fully Retracted: 2000usec Pulse Width
Half Extended: 1500usec Pulse Width
Fully Extended: 1000usec Pulse Width
Current Drain (12V): 11.9mah Idle
Current Drain (12V):
700mah operating No load
Current Drain (12V):
3500mah operating Max load
Dead band Width:
8usec
Motor Type: 3 Pole Ferrite
Potentiometer: I0K
Gear Type: 4 Metal Gears
Connector Wire Length: 24"
Recommended Fuse: 5amp inline
IP Grade: 2IP 63-total dust protection, water resistant
Duty Cycle: 25% (25% on, 75% off)
Load force: 224.8 lbs
Static load capacity: 517 pounds
Housing Material: Zinc Alloy
IP65 Protection

Detailed Specifications

Aluminum stroke rod and outer tube

12V Servo Actuator with can
6391K401 bronze bearings

1/4” Oilite Bushings (pair)

Price:

 $3.49

Part:

 6391K401

Status:

 

Qty:

- 1/4” Shaft Diameter
- 5/16” Outside Diameter
- 3/4” Length

These bushings allow you to run 1/4” shafts through the pivot points of the linear servo.

Mounting bracket with bushing
12V Servo Actuator front with mount
Lightweight Aluminum Actuator Mount with hardware - small2

Linear Servo Mounts

XL-1 Battery Plug
actuator mounted to channel and tubing with lightweight mounts
Actuator Mount on Channel1
actuator mounted to tubing

The Lightweight Actuator Mount makes it easy to mount a linear servo to channel or tubing.

Linear Servo Speed Controller

5 amp fuse protection

5 amp fuse protection
12V Servo Actuator Plug to controller

Gold-plated connector with twisted 22 gauge wire.

Leads to connect your battery or power supply

Share with friends!

Copyright 1999-2014 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.

We have the parts for your ideas!
Heavy Duty Linear Servo (115+ lbs)
Customer Login
Register

Newsletter Sign-up

New Products! - Click Here

Proud Distributor of

Proud Actobotics Distributor

 

ServoCity
View Shopping Cart button
ServoCity on Facebook3
ServoCity on Google Plus
ServoCity on Pinterest1
ServoCity on Twitter2
ServoCity on Vimeo
ServoCity Blog1
ServoCity on YouTube1