Hitec X2 Multi-Charger

Recharging your high amperage batteries has never been easier or more affordable than with Hitec’s X2 Ultima two-channel charger. Featuring dual 200-watt power ports, this efficient charger will charge two Lithium, NiCd, NiMH or Lead Acid packs at once. It is capable of delivering 10 amps of charging current and can discharge your packs at up to 5 amps for efficient battery maintenance.

Perfect for all electric aircraft and surface hobbyists, the X2 Ultima will power your larger batteries in a short period of time. User manual included.

Battery Types: NiCAD, NiMH, Li-ion, LiPo, LiFe, Pb (Lead-acid)
Battery Voltage: 1.2-24V
Battery Cell Count: 1-18 cell (NiCAD, NiMH)
1-6 LiPo / Li-ion / LiFe cell
1-12 Lead-acid cells (2V-20V)
Charge Current: 0.1~10.0A (Max 200W (Total 400W))
Discharging Current: 0.1~5.0A (Max 25W (Total 50W))
Input: DC 11V~18V
Dimensions: 200 x 135 x 57mm
Net Weight: 727g
Current Drain for Balancing Lithium: 300ma

One XH Adaptor (shown above),
one HP/PQ Adaptor (shown below).

Plug-in battery clamps (included)

Special Features:
-Optimized operating software
-Internal independent lithium battery balancer
-Ability to balance individual cells during battery discharging
-Adaptation to various types of lithium batteries
-“Fast” and “storage” mode for lithium batteries
-Automatic charging current limit

X2 Ultima Charging Specifications:

Included charging cables: