HS-35HD Servo

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8 Volts
Operating Temperature Range: -20 to 60 Degree C
Test Voltage: 4.8 Volts
Operating Speed: 0.10 sec/60° at no load
Stall Torque: 11.11 oz/in. (0.8 kg.cm)
Operating Angle: 40° one side pulse traveling 400usec
360 Modifiable: No
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Direct Drive
Bearing Type: Bushing
Gear Type: Dual Metal Karbonite Gears
Connector Wire Length: 6.29" (160mm)
Dimensions: 0.73” x 0.30” x 0.61” (18.6mm x 7.6mm x 15.5mm
Weight: 0.158oz (4.5g)

Never before has a servo so small delivered so big. The HS-35HD Ultra Nano servo offers unprecedented durability thanks to our exclusive Metal-Karbonite™ gear train. Delivering maximum performance at minimum weight, the
HS-35HD is destined to become an industry favorite. Its long life and uniquely engineered gear train will make it one of the most reliable and efficient “tiny” servos on the market. The HS-35HD is perfect for micro 3D and sport aircraft as well as many small helicopters and is loaded with features normally found on much larger standard size premium servos. We also designed a new patent pending layout for the gears so that the potentiometer is now connected directly to the circuit board.

Detailed Specifications

11.11 oz-in.

0.10 sec/60°

Price:

$24.99

Part:

33035S

Status:

Qty:

Included servo arms and mounting hardware.

This servo can operate 180° when given a pulse signal ranging from 600usec to 2400usec. Since most R/C controllers cannot generate this wide of signal range, you will need to use our servo stretcher for 180° operation.

The HS-35HD is about the size of a penny.

A = .30” (7.61mm)
B = .226” (5.73mm)
C = .654” (16.62mm)
E = .174” (4.43mm)
F = .562” (14.27mm)
G = .230” (5.84mm)
H = .446” (11.32mm)
J = 1.046” (26.58mm)
K = .171” (4.35mm)
L = .071” (1.8mm)
M = .741” (18.82mm)
X = .106” (2.70mm)