Detailed Specifications
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 6.0-7.4 Volt Peak to Peak Square Wave
Operating Voltage Range: 6.0-7.4 Volts
Operating Temperature Range: -20° to +60° C (-4°F to +140°F)
Operating Speed (6.0V): 0.17sec/60° at no load
Operating Speed (7.4V): 0.13sec/60° at no load
Stall Torque (6.0V): 50oz/in. (3.6kg.cm)
Stall Torque (7.4V): 60oz/in. (4.3kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Dead Band Width: 2usec
Motor Type: 3 Pole Ferrite
Bearing Type: Top Ball Bearing
Gear Type: Metal Gears
Connector Wire Length: 7" (178mm)
Dimensions: 1.14" x 0.51"x 1.18" (29 x 13 x 30mm)
Weight: .77oz (21.9g)
|
|
60 oz-in. |
|
0.13 sec/60° |
Programable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points (up to 120 degrees)
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
Included servo mounts
Included servo horns and hardware
Standard size servo spline
A = .51” (12.9mm)
B = .402” (10.2mm)
C = .976” (24.8mm)
E = .264” (6.7mm)
F = .872” (22.15mm)
G = .409” (10.4mm)
H = .772” (19.6mm)
J = 1.565” (39.75mm)
K = .390” (9.9mm)
L = .179” (4.55mm)
M = 1.136” (28.85mm)
X = .140” (3.56mm)
|
|
|||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
*Digital servos do not need to be programmed to operate. They work great right out of the box and purchasing a programmer is not necessary.
The HS-5087MH digital, metal gear micro servo is the high voltage version of Hitec’s ever popular HS-5085MG. Built with a 3-pole ferrite motor and heavy-duty metal gears, this servo will bring maximum performance to your hobby and deliver extra power with a 2-cell 7.4V LiPo battery. Whether you are a beginner or an expert in the RC field, the
HS-5087MH will provide the strength and capability you need and want in a micro servo. Drivers will find it the perfect steering servo for their 1/16th scale vehicles. Pilots with .15 to .40-size glow and electric aircraft will relish in its power and reliability. Its precision and performance also make it perfect for 500-size helicopters.
Uses C1 Standard Spline
This servo can be configured to operate 180° by using any of the following servo programmers:
Hitec HFP-25, HPP-21, HPP-21+
Hitec Servo Accessories
Click on the picture for further information.
Servo Screws
Servo Hardware
Servo Extensions
Servo Arms
Hitec Casesets
Copyright 1999-2013 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Proud Distributor of
