HS-525BB High Speed


	ServoCity- Servos & Accessories- Hitec Servos- HS-525BB High Speed-


	HS-525BB High Speed

57 oz-in.

0.13 sec/60°


	The HS-525BB servo was specifically designed for helicopter applications. Being able to take the vibration that helicopters produce is essential and the HS-525BB is up to the task. This servo is also suited for aircaft as well.


	Uses C1 Standard Spline


	Click for more information




	This servo can operate 180° when given a pulse signal ranging from 600usec to 2400usec. Since most R/C controllers cannot generate this wide of signal range, you will need to purchase our servo stretcher for 180° operation.

Price:

$29.49

Part:

31525S

Status:

Discontinued by Hitec

Rotation:

Direction:

Qty:


	Detailed Specifications
	Control System: +Pulse Width Control 1500usec Neutral Required Pulse: 3-5 Volt Peak to Peak Square Wave Operating Voltage: 4.8-6.0 Volts Operating Temperature Range: -20 to +60 Degree C Operating Speed (4.8V): 0.17sec/60° at no load Operating Speed (6.0V): 0.13sec/60° at no load Stall Torque (4.8V): 45.82 oz/in. (3.3kg.cm) Stall Torque (6.0V): 56.93 oz/in. (4.1kg.cm) Operating Angle: 45 Deg. one side pulse traveling 400usec 360 Modifiable: Yes Direction: Clockwise/Pulse Traveling 1500 to 1900usec Current Drain (4.8V): 8mA/idle and 250mA no load operating Current Drain (6.0V): 8.7mA/idle and 280mA no load operating Dead Band Width: 6usec Motor Type: 5 Pole Ferrite Potentiometer Drive: Indirect Drive Bearing Type: 1 Ball Bearing and 1 Oilite Bushing Gear Type: All Nylon Gears Connector Wire Length: 11.81" (300mm) Dimensions: 1.56" x 0.77"x 1.41" (39.8 x 19.8 x 36mm) Weight: 1.56 oz. (44.5g)

	Copyright 1999-2010 Robotzone. LLC. - All Rights Reserved ServoCity is a registered trademark of Robotzone, LLC.