|
|
194 oz-in. |
|
0.09 sec/60° |
Increase your performance not your budget with the high voltage, high speed, digital HS-5565MH. Featuring a high performance coreless motor, heavy-duty metal gears and dual ball bearings, the HS-5565MH is rated for 7.4 volt, 2S LiPo operation. The HS-5565MH brings lightning speed and acceleration to your 1/10th scale touring cars, buggies and short course vehicles, helicopters up to .90-size and sport to high performance aircraft up to 25 percent. Get all the speed and muscle without straining your wallet! Hitec is proud to introduce this economical, premium digital, high voltage, coreless motor servos, the HS-5565MH.
Detailed Specifications
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 6.0-7.4 Volt Peak to Peak Square Wave
Operating Voltage Range: 6.0-7.4 Volts
Operating Temperature Range: -20° to +60° C (-4°F to +140°F)
Operating Speed (6.0V): 0.11sec/60° at no load
Operating Speed (7.4V): 0.09sec/60° at no load
Stall Torque (6.0V): 153 oz/in. (11 kg.cm)
Stall Torque (7.4V): 194 oz/in. (14 kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Dead Band Width: 2usec
Motor Type: Coreless
Bearing Type: Dual Ball Bearings
Gear Type: Metal Gears
Connector Wire Length: 11.8” (30mm)
Dimensions: 1.57” x 0.78” x 1.49” (39.8 x 19.8 x 37.8mm)
Weight: 2.10oz (60g)
Uses C1 Standard Spline
|
|
|||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
Included servo horns and hardware
This servo can be configured to operate 180° by using any of the following servo programmers:
Hitec HFP-25, HPP-21, HPP-21+
Standard size servo spline
Features:
-Rated for 2S LiPo operation
-Ideal for 1/10 scale touring cars, buggies and short course vehicles, helicopters up to .90 size, and sport to high performance aircraft up to 25%
-Heavy duty metal gears and dual ball bearings
-Coreless motor
-Two year limited warranty through Hitec beginning at date of purchase
Hitec Servo Accessories
Click on the picture for further information.
Servo Screws
Servo Hardware
Servo Extensions
Servo Arms
Hitec Casesets
Copyright 1999-2013 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Proud Distributor of
