We have the parts for your ideas!
ServoCity- Servos & Accessories- Hitec Servos- HS-5625MG Digital Speed-

HS-5625MG Digital Speed

 

131 oz-in.

 

0.14 sec/60°

The HS-5625MG is one of our top selling digital servos.  The combination of torque, speed, and extreme holding power make it a favorite among top pilots of both aircraft and helicopters. Special alloy gears called “Alumite” offer tremedous strength yet are lightweight as well. The digital circuitry allows you to program a number of performance parameters by using our hand held programmer. We offer this servo in several configurations, 90° stock rotation, 180° modified rotation, continuous rotation (potentiometer is left outside the servo case) and reverse rotation.

*Digital servos do not need to be programmed to operate. They work great right out of the box and purchasing a programmer is not neccessary.
Servo Angle Schematic 180 3.8

This servo can be configured to operate 180° two ways. Option 1, send a pulse signal ranging from 600usec to 2400usec. Option 2, use a Hitec HFP-20 programmer to modify the internal servo program.

Price:

$54.99

Part:

35625S

Status:

 Out of Stock Button

Rotation:

Direction:

Qty:

 

Detailed Specifications

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.18sec/60° at no load
Operating Speed (6.0V): 0.15sec/60° at no load
Stall Torque (4.8V): 110 oz/in. (7.9kg.cm)
Stall Torque (6.0V): 131 oz/in. (9.4kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 450usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
Current Drain (6.0V): 9.1mA/idle and 500mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: 3 Metal Gears and 1 Resin Metal Gear
Connector Wire Length: 11.81" (300mm)
Dimensions: 1.59" x 0.77"x 1.48" (40.6 x 19.8 x 37.8mm)
Weight: 2.1oz. (60g)

Copyright 1999-2008 Robotzone. LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.