We have the parts for your ideas!
ServoCity- Servos & Accessories- Hitec Servos- HS-5965MG Servo-

HS-5965MG Servo

 

134.7 oz-in.

 

0.10 sec/60°

The HS-5965MG replaces the HS-5925MG. Created to withstand the flight loads of a larger aircraft, or the abuse of larger on/off road vehicles with improvements to the servo case top that now features two brass axial bushing for greater strength to insure longevity and smooth rotation. Digital technology combined with coreless motor for speed and power. Coreless motors lack the iron core that standard motors use. The standard iron core is replaced with an expoxy resin that does not have a core at all. Coreless motors are much lighter and ramp up to speed much faster which is one reason for the HS-5965MG’s blistering .10 seconds to 60°. Combining this technology with digital circuitry makes for one extremely fast and powerful servo. Special alloy gears called “Alumite” offer tremedous strength yet are lightweight as well.  We offer the HS-5965MG servo in several configurations, 90° stock rotation, 180° modified rotation, continuous rotation (potentiometer is left outside the servo case) and reverse rotation.

*Digital servos do not need to be programmed to operate. They work great right out of the box and purchasing a programmer is not neccessary.

Servo Angle Schematic 180 3.8

This servo can be configured to operate 180° two ways. Option 1, send a pulse signal ranging from 600usec to 2400usec. Option 2, use a Hitec HFP-20 programmer to modify the internal servo program.

Detailed Specifications

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.13sec/60° at no load
Operating Speed (6.0V): 0.10sec/60° at no load
Stall Torque (4.8V): 105.5 oz/in. (7.6kg.cm)
Stall Torque (6.0V): 134.7 oz/in. (9.7kg.cm)
Operating Angle: 40 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 3mA/idle and 190mA no load operating
Current Drain (6.0V): 3mA/idle and 240mA no load operating
Dead Band Width: 1usec
Motor Type: Coreless
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: 3 Metal Gears, 1 Resin Gear
Connector Wire Length: 8.66" (220mm)
Dimensions: 1.57" x 0.78"x 1.45" (40 x 20 x 37mm)
Weight: 2.18oz (62g)

Heavy Duty twisted wire with gold plated connectors are standard on all Hitec Digital servos.

Price:

$89.99

Part:

35965S

Status:

 

Rotation:

Direction:

Qty:

Shown with quarter for size reference.

Copyright 1999-2008 Robotzone. LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.