We have the parts for your ideas!
ServoCity- Servos & Accessories- Hitec Servos- HS-5996TG-

HS-5996TG

 

111 oz-in.

 

0.10 sec/60°

The HSC-5996TG was designed for racing R/C cars, trucks, boats and robots. With an amazing speed of .10 seconds to 60°, it is perfect for the steering on high performance vehicles. This servo incorporates Titanium gears, dual ball bearing and digital circuitry.  We also include a heavy duty carbon brush coreless motor wrapped in a metal heatsink center case to handle the harshest environment. The new upper case incorporates hardened pins for the gears with oilite bushings to allow these series of servos to take repeated punishment. Topping it off with gold-plated connectors, heavy duty wire and 8 rubber rings in the case offering excellent water and fuel resistance, the HSC-5996TG servo is in a league by itself. We offer the HS-5996TG servo in several configurations, 90° stock rotation, 180° modified rotation, continuous rotation (potentiometer is left outside the servo case) and reverse rotation.

*Digital servos do not need to be programmed to operate. They work great right out of the box and purchasing a programmer is not neccessary.
Servo Angle Schematic 180 3.8

This servo can be configured to operate 180° two ways. Option 1, send a pulse signal ranging from 600usec to 2400usec. Option 2, use a Hitec HFP-20 programmer to modify the internal servo program.

Detailed Specifications

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-6.0 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C (-68F to +140F)
Operating Speed (4.8V): 0.13sec/60° at no load
Operating Speed (6.0V): 0.10sec/60° at no load
Stall Torque (4.8V): 88.87oz/in. (6.4kg.cm)
Stall Torque (6.0V): 111.09oz/in. (8.0kg.cm)
Standing Torque (4.8V): 115.26oz/in. (8.3kg.cm) 5 degree deflection
Standing Torque (6.0V): 144.42oz/in. (10.4kg.cm) 5 degree deflection
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Idle Current Drain (4.8V): 3mA at stop
Idle Current Drain (6.0V): 3mA at stop
Current Drain (4.8V): 200mA/idle and 2.0 amps at lock/stall
Current Drain (6.0V): 240mA/idle and 3.0 amps at lock/stall
Dead Band Width: 2usec
Motor Type: Coreless Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Dual Ball Bearing MR106
Gear Type: 4 Titanium Gears
Connector Wire Length: 7" (178mm)
Dimensions: 1.57" x 0.78"x 1.45" (40 x 20 x 37mm)
Weight: 2.18oz (62g)

Price:

Discontinued

Part:

35996S

Status:

 Discontinued see HS-7950TG

Rotation:

Direction:

Qty:

 

Copyright 1999-2009 Robotzone. LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.