HS-635HB High Torque


	ServoCity- Servos & Accessories- Hitec Servos- HS-635HB High Torque-


	HS-635HB High Torque

83 oz-in.

0.15 sec/60°


	The all new HS-635HB has taken the place of the HS-605BB. Dual ball bearing with Karbonite gear offer great durability and smooth operation. The servo also comes with a great set of heavy duty servo horns and arms including all mounting hardware.




	This servo can operate 180° when given a pulse signal ranging from 600usec to 2400usec. Since most R/C controllers cannot generate this wide of signal range, you will need to purchase our servo stretcher for 180° operation.

Price:

$29.99

Part:

33635S

Status:

Rotation:

Direction:

Qty:


	Detailed Specifications
	Control System: +Pulse Width Control 1500usec Neutral Required Pulse: 3-5 Volt Peak to Peak Square Wave Operating Voltage: 4.8-6.0 Volts Operating Temperature Range: -20 to +60 Degree C Operating Speed (4.8V): 0.18sec/60° at no load Operating Speed (6.0V): 0.15sec/60° at no load Stall Torque (4.8V): 69 oz/in. (5.5kg.cm) Stall Torque (6.0V): 83 oz/in. (6kg.cm) Operating Angle: 45 Deg. one side pulse traveling 400usec 360 Modifiable: Yes Direction: Clockwise/Pulse Traveling 1500 to 1900usec Current Drain (4.8V): 5.3mA/idle and 400mA no load operating Current Drain (6.0V): 6.6mA/idle and 500mA no load operating Dead Band Width: 4usec Motor Type: 3-Pole Ferrite Potentiometer Drive: Indirect Drive Bearing Type: Dual Ball Bearing Gear Type: Karbonite Gears Connector Wire Length: 11.81" (300mm) Dimensions: 1.6" x 0.8"x 1.5" (40 x 20 x 39mm) Weight: 1.83oz. (52.1g)

	Copyright 1999-2008 Robotzone. LLC. - All Rights Reserved ServoCity is a registered trademark of Robotzone, LLC.