HS-6635HB Stan. Hi-Torque


	ServoCity- Servos & Accessories- Hitec Servos- HS-6635HB Stan. Hi-Torque-


	HS-6635HB Stan. Hi-Torque

83 oz-in.

0.15 sec/60°

The HS-6635HB has quickly become a favorite among sport pilots. It offers all the features of the HS-635HB but with much more holding power and precision due to the digital circuitry. The Karbonite gears offer 4 times more strength than nylon gears and it comes with a great array of heavy duty horns and arms including mounting hardware. We offer the HS-6635HB in several configurations, 90° stock rotation, 180° modified rotation, continuous rotation (potentiometer is left outside the servo case) and reverse rotation






	Detailed Specifications
	Control System: +Pulse Width Control 1500usec Neutral Required Pulse: 3-5 Volt Peak to Peak Square Wave Amplifier Type: Digital Amplifier & Mosfet Driver Operating Voltage: 4.8-6.0 Volts Operating Temperature Range: -20 to +60 Degree C Operating Speed (4.8V): 0.18sec/60° at no load Operating Speed (6.0V): 0.15sec/60° at no load Stall Torque (4.8V): 69.43 oz/in. (5kg.cm) Stall Torque (6.0V): 83 oz/in. (6kg.cm) Operating Angle: 40 Deg. one side pulse traveling 400usec 360 Modifiable: Yes Direction: Clockwise/Pulse Traveling 1500 to 1900usec Current Drain (4.8V): 3mA/idle and 400mA no load operating Current Drain (6.0V): 3mA/idle and 500mA no load operating Stall Current (4.8V): 2000mA Stall Current (6.0V): 2500mA Dead Band Width: 2usec Motor Type: 3-Pole Cored Metal Brush Potentiometer Drive: Indirect Drive Bearing Type: Dual Ball Bearing Gear Type: Karbonite - Heavy Duty Resin Connector Wire Length: 11.8" (300mm) Connector Wire Gauge: 22AWG Connector Wire Strand Count: 60EA Dimensions: 1.56" x 0.77"x 1.52" (39.8 x 19.8 x 38.8mm) Weight: 1.83oz (52.1g)


	This servo can be configured to operate 180° two ways. Option 1, send a pulse signal ranging from 600usec to 2400usec. Option 2, use a Hitec HFP-20 programmer to modify the internal servo program.

Price:

$47.99

Part:

36635S

Status:

Rotation:

Direction:

Qty:


	Copyright 1999-2008 Robotzone. LLC. - All Rights Reserved ServoCity is a registered trademark of Robotzone, LLC.