HS-6965HB Hi-Speed Coreless


	ServoCity- Servos & Accessories- Hitec Servos- HS-6965HB Hi-Speed Coreless-


	HS-6965HB Hi-Speed Coreless

111 oz-in.

0.08 sec/60°

If speed is what you need then the HS-6965HB is a great choice. A super fast transit time of .08 sec. to 60°, means this servo works great with gyros where speed is a must. With the HS-6965HB’s digital technology, you can program just about all the functions of the servo. We offer the HS-6965HB in several configurations, 90° stock rotation, 180° modified rotation, continuous rotation (potentiometer is left outside the servo case) and reverse rotation.






	Detailed Specifications
	Control System: +Pulse Width Control 1500usec Neutral Required Pulse: 3-5 Volt Peak to Peak Square Wave Amplifier Type: Digital Amplifier & Mosfet Driver Operating Voltage: 4.8-6.0 Volts Operating Temperature Range: -20 to +60 Degree C Operating Speed (4.8V): 0.10sec/60° at no load Operating Speed (6.0V): 0.08sec/60° at no load Stall Torque (4.8V): 92 oz/in. (6.6kg.cm) Stall Torque (6.0V): 111 oz/in. (8.0kg.cm) Operating Angle: 40 Deg. one side pulse traveling 400usec 360 Modifiable: Yes Direction: Clockwise/Pulse Traveling 1500 to 1900usec Current Drain (4.8V): 3mA/idle and 200mA no load operating Current Drain (6.0V): 3mA/idle and 240mA no load operating Stall Current (4.8V): 2400mA Stall Current (6.0V): 3000mA Dead Band Width: 2usec Motor Type: Coreless Metal Brush Potentiometer Drive: 6-Slider, Indirect Drive Bearing Type: Dual Ball Bearing Gear Type: Karbonite - Heavy Duty Resin Connector Wire Length: 11.8" (300mm) Connector Wire Gauge: 22AWG Connector Wire Strand Count: 60EA Dimensions: 1.60" x 0.80"x 1.50" (40 x 20 x 37 mm) Weight: 1.83oz (52.1g)


	This servo can be configured to operate 180° two ways. Option 1, send a pulse signal ranging from 600usec to 2400usec. Option 2, use a Hitec HFP-20 programmer to modify the internal servo program.

Price:

$84.99

Part:

36965S

Status:

Rotation:

Direction:

Qty:

Heavy Duty horn set included!


	Copyright 1999-2008 Robotzone. LLC. - All Rights Reserved ServoCity is a registered trademark of Robotzone, LLC.