We have the parts for your ideas!
ServoCity- Servos & Accessories- Hitec Servos- HS-6975HB Premium Coreless-

HS-6975HB Premium Coreless

 

144 oz-in.

 

0.10 sec/60°

The HS-6975HB is technology at its finest. Ultra smooth,wicked fast and very powerful are word to describe this new servo. When you compare the performance with the price, you can understand why this servo is quickly becoming a favorite among high performance pilots. The Karbonite gears are virtually wear-free and provide up to 4 times the strength of nylon gears. The HS-6975HB is also extremely easy to program with our hand held programmer. We offer this servo in several configurations, 90° stock rotation, 180° modified rotation, continuous rotation (potentiometer is left outside the servo case) and reverse rotation.

Detailed Specifications

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Amplifier Type: Digital Amplifier & Mosfet Driver
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.13sec/60° at no load
Operating Speed (6.0V): 0.10sec/60° at no load
Stall Torque (4.8V): 119 oz/in. (8.6kg.cm)
Stall Torque (6.0V): 144 oz/in. (10.4kg.cm)
Operating Angle: 40 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 3mA/idle and 200mA no load operating
Current Drain (6.0V): 3mA/idle and 240mA no load operating
Stall Current (4.8V): 2400mA
Stall Current (6.0V): 3000mA
Dead Band Width: 2usec
Motor Type: Coreless Metal Brush
Potentiometer Drive: 6-Slider, Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: Karbonite - Heavy Duty Resin
Connector Wire Length: 11.8" (300mm)
Connector Wire Gauge: 22AWG
Connector Wire Strand Count: 60EA
Dimensions: 1.60" x 0.80"x 1.50" (40 x 20 x 37 mm)
Weight: 1.83oz (52.1g)
Servo Angle Schematic 180 3.8

This servo can be configured to operate 180° two ways. Option 1, send a pulse signal ranging from 600usec to 2400usec. Option 2, use a Hitec HFP-20 programmer to modify the internal servo program.

Price:

$84.99

Part:

36975S

Status:

 

Rotation:

Direction:

Qty:

Heavy Duty horn set included!

Copyright 1999-2008 Robotzone. LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.