We have the parts for your ideas!
ServoCity- Servos & Accessories- Hitec Servos- HS-6985HB Hi-Torq. Coreless-

HS-6985HB Hi-Torq. Coreless

 

172 oz-in.

 

0.13 sec/60°

The HS-6985HB can be sumed up in one word, awesome. Awesome not only describes the power this servo puts out but also the speed and precision in which it operates. The Karbonite gears are virtually wear-free and provide up to 4 times the strength of nylon gears. The HS-6985HB is also extremely easy to program with our hand held programmer. We offer this servo in several configurations, 90° stock rotation, 180° modified rotation, continuous rotation (potentiometer is left outside the servo case) and reverse rotation.

Detailed Specifications

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Amplifier Type: Digital Amplifier & Mosfet Driver
Operating Voltage:
4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.16sec/60°
at no load
Operating Speed (6.0V): 0.13sec/
60° at no load
Stall Torque (4.8V): 144 oz/in. (10.4kg.cm)
Stall Torque (6.0V): 172 oz/in. (12.4kg.cm)
Operating Angle: 40 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 3mA/idle and 200mA no load operating
Current Drain (6.0V): 3mA/idle and 240mA no load operating
Stall Current (4.8V): 2400mA
Stall Current (6.0V): 3000mA

Dead Band Width: 2usec
Motor Type: Coreless Metal Brush
Potentiometer Drive: 6-Slider, Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: Karbonite - Heavy Duty Resin
Connector Wire Length: 11.8" (300mm)
Connector Wire Gauge: 22AWG
Connector Wire Strand Count: 60EA
Dimensions:
1.60" x 0.80"x 1.50" (40 x 20 x 37 mm)
Weight: 1.83oz (52.1g)

Servo Angle Schematic 180 3.8

This servo can be configured to operate 180° two ways. Option 1, send a pulse signal ranging from 600usec to 2400usec. Option 2, use a Hitec HFP-20 programmer to modify the internal servo program.

Price:

$84.99

Part:

36985S

Status:

 Discontinued

Rotation:

Direction:

Qty:

 

Heavy Duty horn set included!

Copyright 1999-2008 Robotzone. LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.