HS-7235MH Servo

61.1 oz-in.

0.08 sec/60°

Programable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points (up to 180 degrees)
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
- Resolution
- Overload Protection

Standard size servo spline

*Digital servos do not need to be programmed to operate. They work great right out of the box and purchasing a programmer is not necessary.

Hitec’s new high voltage and high speed HS-7235MH delivers exceptional speed and torque in a compact package. Built with an efficient core-less motor optimized for 7.4V operation and heavy-duty metal gear train with dual ball bearings, this high-end mini servo provides unbridled performance! Whether you’re flying mid-size gas and electric airplanes, 500-550 electric helis, or driving 1/12th scale on-road racer and 1/18th scale rock crawlers, the lightning speed and full-size muscle of this servo will make you the master of your RC domain!

Click for more information

Uses C1 Standard Spline

Detailed Specifications

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 6.0-7.4 Volt Peak to Peak Square Wave
Operating Voltage Range: 6.0-7.4 Volts
Operating Temperature Range: -20° to +60° C (-4°F to +140°F)
Operating Speed (6.0V): 0.09sec/60° at no load
Operating Speed (7.4V): 0.08sec/60° at no load
Stall Torque (6.0V): 49.9oz/in. (3.6kg.cm)
Stall Torque (7.4V): 61.1oz/in. (4.4kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Dead Band Width: 2usec
Motor Type: Coreless
Bearing Type: Dual Ball Bearings
Gear Type: Metal Gears
Connector Wire Length: 7" (178mm)
Dimensions: 1.28" x 0.66"x 1.29" (32.4 x 16.8 x 32.8mm)
Weight: 1.2oz (34g)