The HS-765HB servo is a great sail servo. Karbonite gears, dual ball bearings combined with a powerful drive motor mean that this servo is one of the best offered, especially for the price. Comes with heavy duty arms and a 4.25” sail arm.
Detailed Specifications
Control System: +Pulse Width Control 1500usec Neutral Required Pulse: 3-5 Volt Peak to Peak Square Wave Operating Voltage: 4.8-6.0 Volts Operating Temperature Range: -20 to +60 Degree C Operating Speed (4.8V): 0.26sec/60° at no load Operating Speed (6.0V): 0.20sec/60° at no load Stall Torque (4.8V): 161.09 oz/in. (11.6kg.cm) Stall Torque (6.0V): 201.36 oz/in. (14.5kg.cm) Operating Angle: 70 Deg. one side pulse traveling 400usec 360 Modifiable: Yes Direction: Clockwise/Pulse Traveling 1500 to 1900usec Current Drain (4.8V): 8mA/idle and 230mA no load operating Current Drain (6.0V): 8.7mA/idle and 285mA no load operating Dead Band Width: 8usec Motor Type: 3 Pole Ferrite Potentiometer Drive: Indirect Drive Bearing Type: 1 Bearing and 1 Oilite Bushing Gear Type: All Nylon Gear Connector Wire Length: 11.81" (300mm) Dimensions: 2.33" x 1.14"x 2.05" (59.4 x 29 x 52.2mm) Weight: 3.6oz.. (102g)
General Servo Information
What is a Servo
How Servos Work
What Servo to use
Servo Power & Speed
Rotation Direction
Connector Types
180° Rotation
Continuous Rotation
Modifying Servos
Heavy Duty Karbonite gears maintain tight tolerances even after thousands of cycles.
The HS-765HB includes all the servo horns above.
Copyright 1999-2009 Robotzone. LLC. - All Rights Reserved ServoCity is a registered trademark of Robotzone, LLC.
