Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage Range: 6.0-7.4 Volts
Operating Temperature Range: -20° to +60° C (-4°F to +140°F)
Operating Speed (6.0V): 0.08 sec/60° at no load
Operating Speed (7.4V): 0.07 sec/60° at no load
Stall Torque (6.0V): 181 oz/in. (13 kg.cm)
Stall Torque (7.4V): 222 oz/in. (16 kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable: No
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Dead Band Width: 2usec
Motor Type: Coreless
Bearing Type: Dual Ball Bearings
Gear Type: Titanium Gears
Connector Wire Length: 11.8” (30mm)
Dimensions: 1.57” x 0.79” x 1.50” (40 x 20 x 38mm)
Weight: 2.33oz (66g)
The high resolution and response of Hitec’s new HS-83XX series of servos brings the “wow” factor to your plane, heli, car or robot! Designed with an efficient coreless motor, the industry’s leading titanium gear train, and 7.4V capability, these ultra performance servos provide impressive precision. They are truly the trifecta of servo perfection. With the HS-8360TH offering accelerated speed, the HS-8370TH providing swift strength, and the HS-8380TH delivering revolutionary force. The rapid-fire response and decisive action of each servo elevates your hobby to an entirely new level!
Hitec Servo Accessories
Click on the picture for further information.
These horns have the new Hitec 25T spline (same as the Futaba 25T spline). If you want to purchase additional horns you will need to buy these exact replacement horns or purchase Futaba 25T horns.
Look for the H25T marking on horns that will work with this servo.
Included servo horns and hardware:
If you plan to use this servo with our ServoBlocksTM you will need to purchase the Futaba standard size ServoBlocksTM..
NEW! Hitec 25 Tooth Spline
The stock servo screw requires a 3/32” Hex Key
Copyright 1999-2014 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
Huge Selection. Low Prices.