HSR-5995TG Ultra Torque

ServoCity - Servos & Accessories - Hitec Servos - HSR-5995TG Ultra Torque

417 oz-in.

0.12 sec/60°

It takes quite a servo to impress us at ServoCity but the HSR-5995TG does just that. This servo raises the bar when it comes to servo technology. The performance is staggering for a servo this size especially when installed in our ServoPower Gearbox (over 2,000 oz-in. or torque). Right out of the box, this servo operates a full 180°. A full set of titanium gears (a first in the servo industry) offers 48 times the strength of nylon gears. Each gearset shaft rides in bronze bushings for durability and strength. We offer the HSR-5995TG servo in two configurations, continuous rotation (potentiometer is left outside the servo case) and reverse rotation. We know that this is not a cheap servo but you definitely get what you pay for - you will be impressed!

*Digital servos do not need to be programmed to operate. They work great right out of the box and purchasing a programmer is not neccessary.




	The HSR-5995TG has been replaced with the all new HSR-5990TG. Now with even better duty cycles and an aluminum servo case.


	Detailed Specifications
	Control System: +Pulse Width Control 1500usec Neutral Required Pulse: 3.3-7.4 Volt Peak to Peak Square Wave Operating Voltage Range: 4.8-7.4 Volts Operating Temperature Range: -20 to +60 Degree C (-68F to +140F) Operating Speed (6.0V): 0.15 sec/60° at no load Operating Speed (7.4V): 0.12sec/60° at no load Stall Torque (6.0V): 333.29 oz-in. (24kg.cm) Stall Torque (7.4V): 416.61 oz-in. (30kg.cm) Standing Torque (6.0V): 433.27 oz-in. (31.2kg.cm) 5 degree deflection Standing Torque (7.4V): 541.59 oz-in. (39kg.cm) 5 degree deflection Operating Angle: 90 Deg. one side pulse traveling 400usec 360 Modifiable: Yes Direction: Clockwise/Pulse Traveling 1500 to 1900usec Idle Current Drain (6.0V): 3mA at stop Idle Current Drain (7.4V): 3mA at stop Current Drain (6.0V): 300mA/idle and 4.2 amps at lock/stall Current Drain (7.4V): 380mA/idle and 5.2 amps at lock/stall Dead Band Width: 2usec Motor Type: Coreless Metal Brush Potentiometer Drive: 6 Slider Indirect Drive Bearing Type: Dual Ball Bearing MR106 Gear Type: 4 Titanium Gears Connector Wire Length: 11.81" (300mm) Dimensions: 1.57" x 0.78"x 1.45" (40 x 20 x 37mm) Weight: 2.18oz (62g)

Price:

$114.99

Part:

35995S

Status:

Discontinued

Rotation:

Direction:

Qty:



	Ultra strong Titanium gears offer unbeatable strength and tight mesh over thousands of cycles.





	Programmability features and state of the art hardware make the HSR-5995TG servo one of the most advanced in any industry.





	For aircraft applications, a standard bottom case is included with each HSR-5995TG servo.


		The HSR-5995TG upper case incorporates brass bushings for the servo gear shafts for longevity and smooth operation.


	Copyright 1999-2008 Robotzone. LLC. - All Rights Reserved ServoCity is a registered trademark of Robotzone, LLC.