Introducing the all new MPT2100-DS pan and tilt head; the dual sided version of our popular PT-2100 system. This precision system is designed to smoothly operate cameras up to 40 lbs even though the entire head only weighs 11 lbs. Dual ABEC-5 ball bearings support the hollow stainless steel shafts that allow video and power wires to be routed through the points of rotation. The system can operate in upright or hanging position. Control speed is fully proportional (variable) from 1/2° per second up to 20° per second. Installing optional motors, range can go down to .05° per second up to 60° per second. Toothed Kevlar belts ensure minimal backlash, ultra quiet operation and have a lifetime warranty. Balancing your camera is done by simply loosening the belt on the corresponding axis and adjusting the camera position. The MPT2100-DS is precisely controlled by a new digital joystick controller. The two channel controller is fully proportional and the maximum speed of each axis can be limited by the min/max knobs for the ultra-slow shots. Setup is quick and easy as the controller links to the pan and tilt head with a single CAT6 cable and is powered by a 12V power supply. The system ships as a ready-to-run unit that includes a pan & tilt head, joystick control, 25 foot CAT6 cable, and 12V power supply. Camera shown in images not included. Manufactured in the USA. (Patents Pending)
• Adjustable Framework
• Stainless Steel Hollow Shafts
• 6061-T6 Aluminum Construction (Anodized)
• Kevlar Belt Drive
• Expandable Controller
• Ultra Precision Gearmotors
• 12 Volt Operation
• RTR (Ready to Run) out of the box
• Pan & Tilt System
• Joystick Controller
• 25ft CAT6 Cable
• 12V DC Power Supply
• Adjustment Tool
Belt drive for smooth operation.
The included 1” bar clamp allows you to easily attach the joystick controller to the weight bar of a jib crane.
A 25’ CAT6 cable is included with the MPT2100-DS system. To purchase additional CAT6 cable lengths click here.
Click on the picture for further information.
Pulleys & Belts
Jib Mounting System
Precision Motor Mount
Shown with a Canon XL1 in hanging position (camera not included)
Shown with a Canon XL1 in the upright position (camera not included)
Fully adjustable motor mounts
Video Coming Soon!
Want to mount this system to a jib? Click Here
New lower price! Was $1699.99
Auxiliary Joystick Control
This controller is to be used in conjunction with the Joystick Controller (main controller) that comes with the MPT2100-DS. The auxiliary controller simply plugs into the main controller via the provided 3’ CAT6 cable and allows the user to proportionally control 2 additional gearmotors.
Shown with the R2100-DS Roll Attachment.
Copyright 1999-2013 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
Proud Distributor of