Control System: +Pulse Width Control
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 6.6V - 7.4V
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (6.6V): 0.17 sec/60 degrees at no load
Operating Speed (7.4V): 0.15 sec/60 degrees at no load
Stall Torque (6.6V): 80.6 oz/in. (5.8 kg-cm)
Stall Torque (7.4V): 90.3 oz/in. (6.5 kg-cm)
Motor Type: Coreless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Single Ball Bearing
Gear Type: Nylon
Connector Wire Length: 12"
Dimensions: 1.57” x 0.79” x 1.50” (40 x 20 x 38.1mm)
Weight: 1.73oz. (49g)
Detailed Specifications
|
|
90.3 oz-in. |
|
0.15 sec/60° |
This is the Futaba S3072HV S.Bus Programmable High Torque Digital High Voltage Servo. This single ball bearing servo is ideal for airplanes, cars and boats. Futaba S.Bus High Voltage Servos are capable of using up to 2S LiPo's to maximize speed and torque. S.Bus compatibility adds the best in setup simplicity, while programmability provides the ultimate in performance tuning.
Uses a 3F Standard Spline (25T)
Futaba Servo Accessories
Click on the picture for further information.
Servo Screws
Servo Hardware
Servo Extensions
Servo Arms
Futaba Casesets
S3072HV included hardware.
Copyright 1999-2013 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Proud Distributor of
