|
Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.11sec/60 degrees at no load
Operating Speed (6.0V): 0.09sec/60 degrees at no load
Stall Torque (4.8V): 17 oz/in. (1.2kg.cm)
Stall Torque (6.0V): 21 oz/in. (1.5kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: 3-Pole Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Nylon Bearing
Gear Type: All Nylon Gears
Connector Wire Length: 12"
Dimensions: .9" x 0.4"x .8" (41 x 20 x 30mm)
Weight: .3oz. (9.5g)
|
