|
Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): .11sec/60 degrees at no load
Operating Speed (6.0V): .10sec/60 degrees at no load
Stall Torque (4.8V): 19.4 oz/in. (1.2kg.cm)
Stall Torque (6.0V): 20.8 oz/in. (1.5kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: No
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Top Ball Bearing
Gear Type: All Nylon Gears
Connector Wire Length: 12"
Dimensions: .86" x 0.43"x .80" (21.8 x 11 x 20.3mm)
Weight: .34oz. (9.6g)
|
