|
|
38.9 oz-in. |
|
0.15 sec/60° |
Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.15sec/60 degrees at no load
Operating Speed (6.0V): N/A
Stall Torque (4.8V): 38.9 oz/in. (2.8kg.cm)
Stall Torque (6.0V): N/A
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: No
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: 3-Pole Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Ball Bearings
Gear Type: All Nylon Gears
Connector Wire Length: 12"
Dimensions: 1.1" x 0.85x 1.2" (28 x 13 x 29.7mm)
Weight: .6oz. (17g)
Detailed Specifications
Uses a 3F Standard Spline (25T)
Futaba Servo Accessories
Click on the picture for further information.
Servo Screws
Servo Hardware
Servo Extensions
Servo Arms
Futaba Casesets
Copyright 1999-2013 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Proud Distributor of
