Control System: +Pulse Width Control
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0V
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.10sec/60 degrees at no load
Operating Speed (6.0V): 0.09sec/60 degrees at no load
Stall Torque (4.8V): 20.8 oz/in. (1.5kg.cm)
Stall Torque (6.0V): 23.6 oz/in. (1.7kg.cm)
Motor Type: 3-Pole Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearings
Gear Type: Nylon
Connector Wire Length: 12"
Dimensions: 0.86” x 0.43” x 0.91” (21.8 x 11 x 23.2)
Weight: 0.30 oz (8.5g)
Detailed Specifications
|
|
23.6 oz-in. |
|
0.09 sec/60° |
Servo shown with quarter for size reference.
S3117 included hardware.
Ideal for electric planes and small electric helis.
Uses a 2F Spline (21T)
Copyright 1999-2012 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
