|
Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.15sec/60 degrees at no load
Operating Speed (6.0V): 0.13sec/60 degrees at no load
Stall Torque (4.8V): 30.5oz/in. (1.4kg.cm)
Stall Torque (6.0V): 35 oz/in. (1.7kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: No
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: 3-Pole Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Ball Bearing
Gear Type: Metal Gears
Connector Wire Length: 12"
Dimensions: 1.2" x .43"x 1.16" (30 x 10 x 29mm)
Weight: .71oz. (18g)
|
