|
|
208 oz-in. |
|
0.15 sec/60° |
Uses a Large 4F Spline (25T)
Detailed Specifications
Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 6 Volts Only
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (6.0V): 0.15sec/60 degrees at no load
Stall Torque (6.0V): 208 oz/in. (15kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: No
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: Coreless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearings
Gear Type: All Metal Gears
Connector Wire Length: 12"
Dimensions: 1.91" x 0.99"x 1.56" (48.6 x 25.2 x 39.7mm)
Weight: 3.0oz. (85g)
Copyright 1999-2012 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
