Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.11sec/60 degrees at no load
Operating Speed (6.0V): 0.09sec/60 degrees at no load
Stall Torque (4.8V): 30 oz/in. (2.2kg.cm)
Stall Torque (6.0V): 37oz/in. (2.7kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: Coreless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: All Metal Gears
Connector Wire Length: 12"
Dimensions: 1.6" x 0.8"x 1.2" (41 x 20 x 30mm)
Weight: 1.1oz. (31g)
Detailed Specifications
|
|
37 oz-in. |
|
0.09 sec/60° |
Uses a 3F Standard Spline (25T)
Copyright 1999-2012 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
