|
SPG7955A Servo |
Maximum Rotation |
Weight |
4.8V Power |
6.0V Power |
4.8V Speed |
6.0V Speed |
|
HS-7955TG (3:1 ratio) |
180° |
7.09 oz. |
750 |
999 |
.48 sec. |
.39 sec. |
|
HS-7955TG (4:1 ratio) |
180° |
7.09 oz. |
1,000 |
1,332 |
.64 sec. |
.52 sec. |
|
HS-7955TG (5:1 ratio) |
180° |
7.09 oz. |
1,250 |
1,665 |
.80 sec. |
.65 sec. |
|
HS-7955TG (8.6:1 ratio) |
180° |
8.69 oz. |
2,150 |
2,863 |
1.37 sec. |
1.12 sec. |
|
HS-7955TG (13.5:1 ratio) |
180° |
9.99 oz. |
3,375 |
4,495 |
2.16 sec. |
1.76 sec. |
4,495 oz-in. of torque from a $93.99 servo....easily done with the new SPG7955A Servo Power Gearbox. The all new structure is machined from high-strength 6061-T6 aluminum. The hardened 3/8” stainless steel final shaft is supported by dual ABEC-5 precision ball bearings that not only allow extremely smooth operation but can also support up to 200 pounds of vertical and horizontal load. The military grade potentiometer is coupled to the final output shaft. With six optional gear ratios, you are sure to find the right combination of power and speed for your project although the gear ratios can easily be changed. Mounting various attachments is simple with the four 5-40 tapped holes in the aluminum clamp hub. Mounting tabs are .250” thick. Build your own custom SPG7955A by choosing the ratio you need in assembled or kit form (full instructions included). Patented
* We highly recommend purchasing this unit assembled by our factory. If you are not accustomed to using a soldering iron or handling delicate parts, please order this product assembled ready to plug into your receiver or servo controller. It is money well spent. Thanks
Four 5-40 tapped holes in the mounting hub allows for various attachments.
|
|
4,495 oz-in. |
|
0.32 sec/60° (2:1 ratio) |
(Shown with optional 5:1 metal gears)
Shown with 90° Tube Clamp hubs
and hollow 5/8” diameter tubing
Shown with 8” Dual ABS Arm
Shown with round ABS Platform
Shown with 90° Aluminum Mounting Plate
Click here to watch a video of our Standard Rotation Top Mount Servo Gearbox in action.
This servo can be configured to operate 180° by using any of the following servo programmers:
Hitec HFP-25, HPP-21, HPP-21+
This gearbox utilizes a
0.625” hub pattern.
Click here for more information.
Copyright 1999-2012 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
