|
SPT400 |
Max. Camera Weight (6V) |
Weight |
Maximum Tilt |
6.0V Speed |
|
HS-5685MH (7:1 ratio) |
4 lb. |
9.00 oz. |
135° |
1.40 sec. |
|
HS-7950TH (7:1 ratio) |
6 lb. |
9.50 oz. |
135° |
1.05 sec. |
The SPT400 is the perfect camera or sensor tilt. Manufactured from extremely strong ABS plastic and 6061-T6 aluminum enables this mount to handle all types of applications. Precise feedback is provided by the military grade, stainless steel potentiometer supplied. The main shaft is 1/4” stainless steel and is supported by ABEC-5 ball bearings. The 32 pitch gears are made from 7075-T6 aluminum and are offered in every ratio. The SPT400 is designed so that the power from the servo is transferred directly to the spur gear which is bolted to the attachment hub, no power is transferred through the shaft and therefore no slippage will occur. Mounting various cameras or custom attachments is simple with the 1/4” holes in the top plate. Gear ratios can be easily changed to vary the power and speed. Bolts directly onto any of our Servo Power Gearboxes (Pan). Build your own custom SPT400 by choosing the ratio you need, assembled or in kit form (full instructions included). Patented
* We highly recommend purchasing this unit assembled by our factory. If you are not accustomed to using a soldering iron or handling delicate parts, please order this product assembled ready to plug into your receiver or servo controller. It is money well spent. Thanks.
Our aluminum clamping and set screw hubs bolt directly to the bottom of the Tilt system. This allows them to be attached to our gears, sprockets, shafts or other items.
Picture above shows the HS-5485HB servo installed with full metal gears for maximum load.
The SPT400 can tilt forward 90° from top center as shown above.
The SPT400 can tilt back 45° from top center as shown above.
The stainless steel shaft is supported by high quality ball bearings and the servo feedback is handled by a military grade potentiometer.
The top mounting plate offers (3) three .25” diameter mouting holes to easily attach cameras or sensors.
The SPT400 can mount directly on top of our Servo Power Gearboxes (Pan). The schematic to the left shows the unit mounted on an SPG400. The overall size is very compact and can be extremely powerful when used with powerful servos. It can also be mounted upside down in an aircraft fuselage for an aerial camera platform.
Click here to watch a video of our SPT400 Tilt in action!
Think this is cool?
Share with your friends!
This product utilizes a
0.770” hub pattern.
Copyright 1999-2013 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Proud Distributor of
