615378 Schematic1
615384 Schematic
615386 Schematics
Pinion pulley on end of tube with clamp (2)
Pinion pulley on end of tube with clamp
6mm Bore Pinion Pulleys

10

6mm

0.60”

615384

$6.99

 

16

6mm

1.00”

615386

$8.99

Tooth

Bore

Face Dia.

Part #

Price

Status

Qty

Buy

10

.250”

0.60”

615376

$6.99

16

.250”

1.00”

615378

$8.99

The 6mm Bore XL Series (1/5 pitch) Pinion Pulleys can attach directly to any of our gearmotors that have a 6mm output shaft. Simply slide the pulley onto the motor shaft and tighten the 10-32 set screw, using a 3/32 hex key. The pulleys are .40” inside the flanges to allow for belts up to 3/8” in width. The 10 and 16 tooth pulleys are able to run inside of the aluminum Actobotics™ channel. The pulley can be used for building pan and tilt systems, camera sliders, XY tables, robotic drive mechanisms, etc. Constructed of 6061 T6 aluminum. Schematics below.

615384 & 615376
Weight: 0.15 oz

timing belt with pulley

Both the 6mm bore and 1/4” bore pulleys work with XL series timing belts.

Hex Key Group 1.7

These pinion pulley use a 3/32” Hex Key
(sold separately)
click here

Actobotics Logo - page

DREAM. DESIGN. BUILD. REPEAT.

Fig. 1

The 1/4” Bore (#615376 & #615378) XL Series (1/5 pitch) Pinion Pulley can attach directly to our 1/4” shafts. Simply slide the pulley onto the shaft and tighten the 10-32 set screw, using a 3/32 hex key. The 16 tooth pulley is able to run inside of the aluminum Actobotics™ channel. The pulley can be used for building pan and tilt systems, camera sliders, XY tables, robotic drive mechanisms, etc. Constructed of 6061 T6 aluminum. Schematics below.

615386 & 615378
Weight: 0.55 oz

#615386

#615378

#615384

Pinion pulley on channel with ball-bearing hub
Pinion pulley on channel with ball-bearing hub (2)
Pinion pulley on channel with ball-bearing hub (3)
Pinion pulley on shaft inside channel
Pinion pulley with XL timing belt inside channel vertical

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Fig. 8

Fig. 9

Fig. 10

Figure 9 shows the 1/4” bore pulley attached to a Dual Ball Bearing Hub and inserted into a 1” bore tube clamp.

16T pinion pulley

Fig. 2

Pinion pulley inside channel (end view)

Fig. 3

The 10-32 set screw requires a 3/32” hex key.

Shown right with a dual ball bearing hub.

Works great inside our aluminum channel.

Share these pulleys with friends!

#615376 STEP FILE
#615378 STEP FILE
#615384 STEP FILE
#615386 STEP FILE

Right click and save.

STEP-File-Download---right-click-here

Copyright 1999-2014 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.

We have the parts for your ideas!
Timing Pinion Pulleys
Customer Login
Register
New Products! - Click Here

 

ServoCity
View Shopping Cart button
ServoCity on Facebook3
ServoCity on Google Plus
ServoCity on Pinterest1
ServoCity on Twitter2
ServoCity on Vimeo
ServoCity Blog1
ServoCity on YouTube1
ServoCity-Newsletter---Subscribe-Today!
ServoCity is Comodo Secure

Huge Selection. Low Prices.

We-accept-these-forms-of-payment