4YF 2.4GHz Systems


	ServoCity- Radios & Accessories- Transmitters & Radio Packages- 4YF 2.4GHz Systems-


	4YF 2.4GHz Systems


	*Brand New with Full Factory Warranty - USA Authorized Dealer*

Finally....an inexpensive and reliable 4-channel 2.4GHz radio system. It is everything our customers have wanted in a full-range 2.4GHz system! Futaba has been using channel hopping technology for nearly 15 years in industrial R/C applications, so they have the dedicated engineering staff with 2.4GHz expertise. Unlike other manufacturers who started offering 2.4GHz for hobby R/C models using off-the-shelf IC chips, Futaba invested in extra research and development resulting in a custom IC chip thats ideally suited for the unque demands of R/C flying.


		Systems start at only $69.99!



	Convenient, worry-free operation Now you can enjoy the convenience of 2.4GHz operation with the quality and reliability of Futaba! No more worry about someone accidentally turning on another system on your frequency. You can fly anywhere ---flying field, neighborhood park, schoolyard without concern for conflict with another nearby radio system. At the flying field, there’s no more waiting for your frequency chip to become available...just turn it on and fly!

2.4GHz FHSS is not compatible with FASST systems, and the R2004GF receiver is compatible only with electronics created specifically for 2.4GHz FHSS systems.

- FHSS (Frequency Hopping Spread Spectrum) eliminates frequency pins and signal interference-pushbutton transmitter/receiver linking with no binding plugs
- Power Down Mode - reduces RF power for 90 seconds, simplifying ground checks for interference
- All-channel servo reversing for more installation options
- Power and servo reversing switches are located down and out of the way for convenience and to avoid accidental changes
- Battery meter features one Green and one Red LED for easy-to-read GO/NO GO status
- Elevon mixing
- Spring loaded trainer toggle switch for instant "OFF"
- Gimbals have knurled tops for a better "feel" on the sticks and to prevent finger slippage


	Note: *4YF 2.4GHz transmitters will not work with standard FM or PCM receivers.*


	2.4GHz systems do not use crystals




	Compact, “all in one” R2004GF receiver The small but powerful one-piece R2004GF can easily control giant-scale models but is small enough for park flyers.

4YF 2.4GHz Transmitter
Transmitter:
Receiver:
SC8096

So how does the receiver know what transmitter to link to?
Each transmitter has a unique ID code that after linking with the R2004GF receiver, assures this receiver will only follow commands from this transmitter. Set it and forget it! Just push the recessed button on the receiver and it will never forget the unique transmitter ID code, which locks the receiver to the transmitter. With over 134 million possible codes, there’s no chance for a conflict.


	Copyright 1999-2010 Robotzone. LLC. - All Rights Reserved ServoCity is a registered trademark of Robotzone, LLC.