BLS-254 Brushless Servo

Control System: +Pulse Width Control
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8V
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.06sec/60 degrees at no load
Stall Torque (4.8V): 52.8 oz/in. (3.8kg-cm)
360 Modifiable: No
Motor Type: Brushless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearings
Gear Type: Metal
Connector Wire Length: 12"
Dimensions: 1.57” x 0.79” x 1.45” (40 x 20 x 36.8mm)
Weight: 1.8oz. (51g)

Detailed Specifications

Brushless Advantages:

- At least FIVE TIMES longer-lasting than brushed servos.
- 30% faster response times.
- Greater resistance to jolts and vibration.
- Smoother operation.
- Same power consumption as brushed digital servos.
- Same compact case size as standard servos.
- Exceptionally durable geartrain.
- Smooth dual ball bearings and strong Samarium Cobalt magnets.

BLS-254 included hardware.

This servo works with the GY520 Gyro. When using with the gyro, make sure you change to the correct mode in the gyro software.

Click for more information

Uses a 3F Standard Spline (25T)

Futaba Servo Accessories

Click on the picture for further information.

Servo Screws

Servo Hardware

Servo Extensions

Servo Arms

Futaba Casesets