Detailed Specifications
|
|
97.2 oz-in. |
|
0.12 sec/60° |
Brushless Advantages:
- At least FIVE TIMES longer-lasting than brushed servos.
- 30% faster response times.
- Greater resistance to jolts and vibration.
- Smoother operation.
- Same power consumption as brushed digital servos.
- Same compact case size as standard servos.
- Exceptionally durable geartrain.
- Smooth dual ball bearings and strong Samarium Cobalt magnets.
BLS-651 included hardware.
Control System: +Pulse Width Control
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0V
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.15sec/60 degrees at no load
Operating Speed (6.0V): 0.12sec/60 degrees at no load
Stall Torque (4.8V): 76.4 oz/in. (5.5kg-cm)
Stall Torque (6.0V): 97.2oz/in. (7.0kg-cm)
Motor Type: Brushless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearings
Gear Type: Metal
Connector Wire Length: 12"
Dimensions: 1.40” x 0.59” x 1.13” (35.5 x 15 x 28.6mm)
Weight: 0.92 oz. (26g)
Specially designed for smaller 1/12 scale car applications.
NiCd use only.
Uses a 3F Standard Spline (25T)
Copyright 1999-2012 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
