HS-5065MG Servo


	ServoCity- Servos & Accessories- Hitec Servos- HS-5065MG Servo-


	HS-5065MG Servo

30.55 oz-in.

0.11 sec/60°

Hitec just raised the bar by offering the ever popular HS-65 in a new digital version! The HS-5065MG High Performance Micro Servo features Hitecs digital, programmable circut for incredible resolution, centering and holding torque; also featuring metal gears, a top-ball bearing, and nearly 31 ounces/inches of torque with a quick transit time of 0.11 sec at 6 volts, it will no doubt be the choice for high performance micro helicopters, electric park flyers, 1/18 scale cars and light duty robotic projects. We offer the new HS-5065MG servo in several configurations, 90° stock rotation, 180° modified rotation (programmed), continuous rotation (potentiometer is left outside the servo case) and reverse rotation.


	*Digital servos do not need to be programmed to operate. They work great right out of the box and purchasing a programmer is not neccessary.




	This servo can be configured to operate 180° two ways. Option 1, send a pulse signal ranging from 600usec to 2400usec. Option 2, use a Hitec HFP-20 programmer to modify the internal servo program.


		Programable Features: - Dead Band Width - Direction of Rotation - Speed of Rotation (slower) - End Points (up to 180 degrees) - Neutral Points - Fail Safe On/Off - Fail Safe Points - Resolution (default is set at high) - Overload Protection (default is off)

	Detailed Specifications
	Control System: +Pulse Width Control 1500usec Neutral Required Pulse: 4.8-6.0 Volt Peak to Peak Square Wave Operating Voltage Range: 4.8-6.0 Volts Operating Temperature Range: -20 to +60 Degree C (-68F to +140F) Operating Speed (4.8V): 0.14 sec/60° at no load Operating Speed (6.0V): 0.11 sec/60° at no load Stall Torque (4.8V): 24.99oz/in. (1.8kg.cm) Stall Torque (6.0V): 30.55oz/in. (2.2kg.cm) Operating Angle: 45 Deg. one side pulse traveling 400usec 360 Modifiable: Yes Direction: Clockwise/Pulse Traveling 1500 to 1900usec Idle Current Drain (4.8V): 3mA at stop Idle Current Drain (6.0V): 3mA at stop Current Drain (4.8V): 200mA/idle and 2.0 amps at lock/stall Current Drain (6.0V): 240mA/idle and 3.0 amps at lock/stall Dead Band Width: 2usec Motor Type: Carbon Brush Potentiometer Drive: 6 Slider Indirect Drive Bearing Type: Dual Ball Bearing MR106 Gear Type: Metal Gears Connector Wire Length: 7" (178mm) Dimensions: See Schematics Weight: .42oz (11.9g)

Price:

$46.99

Part:

35065S

Status:

Rotation:

Direction:

Qty:








				The HS-5065MG comes with two extra horns and mounting hardware.








		The HS-5065MG Spline is smaller than the standard Hitec spline.


	Copyright 1999-2008 Robotzone. LLC. - All Rights Reserved ServoCity is a registered trademark of Robotzone, LLC.