HS-7954SH Servo

Detailed Specifications

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-7.4 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-7.4 Volts
Operating Temperature Range: -20 to +60 Degree C (-68F to +140F)
perating Speed (4.8V): 0.18 sec/60° at no load
Operating Speed (6.0V): 0.15 sec/60° at no load
Operating Speed (7.4V): 0.12 sec/60° at no load
Stall Torque (4.8V): 275oz/in. (20kg.cm)
Stall Torque (6.0V): 333oz/in. (24kg.cm)
Stall Torque (7.4V): 403oz/in. (29kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Dead Band Width: 2usec
Motor Type: Coreless Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Dual Ball Bearing MR106
Gear Type: Steel Gears
Connector Wire Length: 7" (178mm)
Dimensions: 1.57" x 0.78"x 1.45" (40 x 20 x 37mm)
Weight: 2.40oz (68g)

Price:

$99.99

Part:

37954S

Status:

Rotation:

Direction:

Qty:

403 oz-in.

0.12 sec/60°

*Digital servos do not need to be programmed to operate. They work great right out of the box and purchasing a programmer is not necessary.

HS-7954SH Hardware Set

Programable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points (up to 180 degrees)
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
- Resolution (default is set at high)
- Overload Protection (default is off)

Introducing the next generation Ultra performance servos from Hitec. The "Ultra Torque" HS-7954SH features our second generation "G2" programmable digital circuit, steel gear set, heatsink case, and ultra power coreless motor making it arguably one of the best R/C servos ever produced! This new circuit has twice the resolution of our original circuit while adding programmable overload protection. The HS-7954SH has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 402oz./in. of torque at 7.4 volts, all this power is harnessed by incorporating steel gears for great durability and two strong hardened steel gear pins and axial brass bushing mounted in the servo case. We offer the HS-7954SH servo in several configurations, 90° stock rotation, 180° modified rotation, continuous rotation (potentiometer is left outside the servo case) and reverse rotation.