|
|
196 oz-in. |
|
0.13 sec/60° |
Control System: +Pulse Width Control 14.25ms Pulse Cycle
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): N/A
Operating Speed (6.0V): 0.13sec/60 degrees at no load
Stall Torque (4.8V): N/A
Stall Torque (6.0V): 196 oz/in. (13.8kg.cm)
Operating Angle: 90 Deg. one side pulse traveling 600usec
360 Modifiable: No
Direction: Counter Clockwise/Pulse Traveling 1520-2120usec
Pulse Width: 920-2120usec
Motor Type: Coreless
Potentiometer Drive: Indirect Drive
Bearing Type: Ball Bearing
Gear Type: Metal Gears
Connector Wire Length: 12"
Dimensions: 1.57" x .80"x 1.50" (40 x 20 x 37.6mm)
Weight: 2.2oz. (63g)
Detailed Specifications
Servo shown with quarter for size reference.
Uses a 3F Standard Spline (25T)
Futaba Servo Accessories
Click on the picture for further information.
Servo Screws
Servo Hardware
Servo Extensions
Servo Arms
Futaba Casesets
Copyright 1999-2013 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Proud Distributor of
