|
|
145.8 oz-in. |
|
0.17 sec/60° |
Unit: mm(in)
Hardware included with S3051HV
Control System: +Pulse Width Control
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 6.0-7.4V
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (6.0V): 0.21sec/60 degrees at no load
Operating Speed (6.6V): 0.19sec/60 degrees at no load
Operating Speed (7.4V): 0.17sec/60 degrees at no load
Stall Torque (6.0V): 132 oz/in. (9.5kg-cm)
Stall Torque (6.6V): 138.9 oz/in. (10.0kg-cm)
Stall Torque (7.4V): 145.8 oz/in. (10.5kg-cm)
Motor Type: Coreless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearings
Gear Type: Metal
Connector Wire Length: 12"
Dimensions: 1.57” x 0.79” x 1.5” (40 x 20 x 38.1mm)
Weight: 1.73 oz (49g)
Detailed Specifications
Uses a 3F Standard Spline (25T)
Futaba Servo Accessories
Click on the picture for further information.
Servo Screws
Servo Hardware
Servo Extensions
Servo Arms
Futaba Casesets
Copyright 1999-2012 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
