Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.12sec/60 degrees at no load
Stall Torque (4.8V): 16.7 oz/in. (1.2kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: 3-Pole Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Bronze Bearings
Gear Type: All Nylon Gears
Connector Wire Length: 12"
Dimensions: .9" x 0.4"x .8" (23 x 10 x 20mm)
Weight: .3oz. (9g)
Detailed Specifications
|
|
16.7 oz-in. |
|
0.12 sec/60° |
Uses a 2F Spline (21T)
Copyright 1999-2012 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
