|
|
33.5 oz-in. |
|
0.11 sec/60° |
Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.13sec/60 degrees at no load
Operating Speed (6.0V): 0.11sec/60 degrees at no load
Stall Torque (4.8V): 27.8oz/in. (2.0kg.cm)
Stall Torque (6.0V): 33.3 oz/in. (2.4kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: No
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: 3-Pole Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Ball Bearing
Gear Type: Metal Gears
Connector Wire Length: 12"
Dimensions: .86" x .43"x .86" (21.8 x 11 x 21.9mm)
Weight: .3oz. (9.3g)
Detailed Specifications
Servo shown with quarter for size reference.
Uses a 2F Spline (21T)
Copyright 1999-2012 Robotzone, LLC. - All Rights Reserved
ServoCity is a registered trademark of Robotzone, LLC.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
